Bulk Aggregates for Patios in Peachtree City, GA

If you are building a patio, gravel and aggregate delivery in Peachtree City, GA starts with the layer nobody sees. Georgia Rock Supply sells graded aggregate base, crushed stone, sand and soil in bulk. Under pavers and flatwork, that base is what keeps the surface flat. The Piedmont red clay here has little topsoil left in places, so you are usually building on clay, not on clean dirt.

Materials for Peachtree City Projects

Most patio failures start under the pavers, not on top. A base that is too thin or laid on wet clay ruts, pumps and settles, and the pavers follow it. On this ground the fix is a compacted base with a bedding layer that drains.

Start with GAB (Graded Aggregate Base). This is the local graded aggregate base, also called GAB. Compact it in lifts and you have a pad that carries a patio, a shed or a parking pad without moving.

Above the base, Screenings (granite screenings, or M10) are the bedding layer. They level under pavers and flagstone and lock the joints when you wet and compact them. Mason Sand does the same job for brick and block and for paver joints.

For drainage at the edge of the patio, #57 Granite is the Georgia standard, usually Crushed Stone, and it goes in French drains and behind walls. #89 Crushed Stone is the small stone for paver joints and tight bedding.

Ground and Conditions in Peachtree City

Red clay sheds water fast off a slope, but once it saturates it holds. A flat spot after a wet spell stays wet, and base laid on wet clay turns soft and ruts under load. That is why a thin base shows itself first as a low spot or a rocking paver.

Soft clay needs a deeper base and drainage, not more stone on top. Cut out the soft clay, put down a drainage layer of Drain Rock, then build the base back in compacted lifts. Bare clay also washes away quickly on cut banks and new grading, so stabilize slopes and ditches before the next storm.

Work runs most of the year here. What stops trucks and base work is saturated clay after a long wet spell, a winter rain or tropical storm remnants. Light freezes are common from November into March, and frost depth is shallow, so your base depth is carried by wet clay and drainage, not by frost.

Delivery to Peachtree City and the Surrounding Area

Order online and pick your material, then choose a quantity. Bulk material is sold by the ton or by the cubic yard, and the two are not the same thing. A yard of base weighs more than a yard of mulch, so measure the area first, then convert.

For most jobs, work out square footage times depth in feet, then divide by 27 for cubic yards. That number is what the calculator on each product page uses, and it keeps you from ordering short or paying for a load you cannot use.

Delivery covers Peachtree City and the rest of Fayette County, including Fayetteville, Tyrone and Brooks. Give the driver a clear drop spot where a truck can reach and turn around. Bulk loads go where the truck fits, so plan the pile location before the truck arrives.

Questions About Gravel and Base in Peachtree City

What gravel is best for a driveway in Peachtree City?

Graded aggregate base is the standard choice here. Compact it in lifts as your base, then top it with Crusher Run or Driveway Gravel if you want a binding surface. Skip the thin layer over wet clay; it will rut.

How much material will my project need?

Measure the area and the finished depth, then convert to cubic yards or tons. For a paver patio, base depth plus a bedding layer of screenings is the total you are covering. Use the calculator on each product page to size the load, and round up slightly so you are not short at the end of the job.

Size Your Load Before You Order

Decide the depth first, then let the calculator turn your measurements into tons or yards. That is the fastest way to get the right amount of graded aggregate base and bedding material to a Peachtree City job. When your numbers are ready, place the order online and Georgia Rock Supply will deliver.